American Airline Initial Ramp Practice Exam

These questions are part of the practice quiz. Start practicing

• When is it permissible to give out a passenger list?
• What is the role of the bypass pin in aircraft ground handling?
• What type of bag in DFW corresponds to the commodity code BO?
• What should be done after the engines are successfully started?
• Potable water must be serviced during every:
• How can personnel identify which type of towbar to use on each aircraft type?
• What should ground crew ensure when they receive "Clearance to Depart"?
• What should you do if you identify an unauthorized person on the ramp?
• Which statement best describes the purpose of disconnecting external power?
• What approach pattern should be used for loading and offloading narrow body aircraft?
• What does it indicate if the flight deck flashes the nose gear light one time?
• Which of the following actions must be taken when preparing for pushback?
• What role does the CARE team provide in relation to passengers?
• Which of the following is NOT a scanning operation?
• Under normal circumstances, where would you place the airstart for an A320F aircraft?
• Which of the following is a Pre-Departure duty?
• What side of the aircraft is indicated by the reference to arrow B?
• Which command indicates a need to cease engine operation?
• Which option should be used when logging issues with a bag?
• What does "Set Brakes" instruct personnel to do during ramp operations?
• What does the command "turn to your left" signify in ramp instructions?
• What does "DGS" stand for in ramp operations?
• Where should personnel be positioned when an aircraft is operating?
• What does it mean when the flashback flashes the nose gear light three times?
• What is the primary focus during a red alert?
• What does the acknowledgment signal from the flight deck during pushback typically entail?
• Where should gate delivery items be loaded on an A321 aircraft?
• When is it appropriate to confirm the installation of chocks?
• Who must give permission prior to disconnecting the GPU?
• What is a key safety procedure during pushback operations?
• High winds procedures begin at what wind speed?
• What does a "Gate Hold" signal during ramp operations?
• In what position must an HR bee be placed on a belt loader?
• Once loading a flight is completed, what must be pressed to finalize the process?
• Where should safety posts/cones be placed for a narrow-body aircraft?
• What is the refusal code if a shipment is not received at the gate?
• In which scenario would you request air supply units?
• During which operational period should ramp vehicles be checked for functionality?
• What is the first step to ensure the aircraft is immobilized on the ramp?
• What is an important safety measure before starting the engines?
• What is the commodity code for priority bags?
• When can nose gear chocks be removed from the aircraft?
• Which bags must be placed on the local baggage claim belt first?
• What should you do if a skid cannot be accommodated on the flight?
• How many baggage carts or dollies can be pulled in a string around aircraft?
• What is the next step after disconnecting external power?
• What action should be taken if ground support equipment is not functioning properly?
• What is the minimum PPE required while working on the ramp?
• Which area typically requires inspection prior to aircraft departure?
• What does the action of "Want Electrical Power Unit" suggest?
• When is it appropriate to communicate aircraft movement intentions to the flight deck?
• What step is crucial before an aircraft can be pushed back from the gate?
• What is typically announced when ready to start engines?
• What should you do with a gate delivery bag at the arrival station?
• What arm should be extended to move the aircraft to the left?
• What should you do if you receive a bomb threat at work?
• What command indicates activation of a backup start system?
• If a package needs a specific code for local processing, what should that code be?
• What is the correct action if the aircraft requires an airstart?
• What command is important just before an aircraft is scheduled to depart?
• What distance defines the jet blast zone for all American aircraft?
• How many baggage carts or dollies are allowed in a string around a wide body aircraft?
• What is represented by arrow E in the context given?
• What is essential to do before commencing the loading process?
• When are seatbelts required to be worn while using ground support equipment (GSE)?
• What term is used to indicate the speed of a closing process or distance?
• What does the command "remove chocks" signify?
• At what distance must a full stop be made when crossing the safety clearance lines?
• If you see someone without a badge on the ramp, what should you do?
• If the red limit line is exceeded during pushback, whom should you contact?
• According to ramp operation commands, what does "turn to your right" indicate?
• What is the primary purpose of placing safety cones on the ramp?
• What is the minimum distance necessary between a live animal and RAM?
• What does the term "Wheels Chocks Away" indicate?
• Where is the Ramp Air Turbine (RAT) located on an A320F aircraft?
• How far out should safety cones be placed on all wide-body aircraft?
• Which aircraft does not utilize the GBU support strap?
• If a bag is leaking, who should you notify?
• What safety practice relates to managing electrical power effectively at the ramp?
• What does a red alert require you to do?
• Once an engine has started at the gate, what is the next step if the aircraft has an inoperable APU and requires an airstart?
• Which engine is denoted as Engine #1 based on the reference provided?
• What is the instruction sign that means to "move straight ahead"?
• What is the ingestion zone defined for all American aircraft?
• What indicates the aircraft requires immediate attention due to fire?
• What does the command “USE THIS GATE” indicate during ramp operations?
• How often should emergency exits be checked for functionality during ramp operations?
• What does the red limit line on the nose gear door or fuselage indicate?
• During a yellow alert, what must never be used?
• Which of the following should be prioritized when loading baggage?
• What is the commodity code for local mail?
• What is the action to take when a vehicle needs to stop safely?
• When handling a leaking bag, what is the first step you should take?
• What is the general expectation if a shipment is declined upon arrival?
• What action should be taken during a yellow alert?
• Who needs to be notified when a battery-powered wheelchair is loaded onto the aircraft?
• Which team member is primarily responsible for overseeing the pushback process?
• What is the commodity code for local bags?
• Where is the APU emergency shut down located on the A320F aircraft?
• What action should be taken if wind speeds reach 30 Knots (35 MPH)?
• What method is used to scan a wheelchair onto the aircraft?
• How can you identify which tower to use on each aircraft type?
• What signifies that the engines are prepared for startup?
• On which side of the aircraft is engine #2 located?
• What does the term "Confirmation" refer to in hand signaling?
• Which flight number is noted for receiving additional screening?
• Why is Eye Contact important in hand signaling?
• Before the towbar and bypass pin can be removed, what must be set after pushback is completed?
• Where is the APU emergency shut down located on the B777 and B737 aircraft?
• What type of bag in PHX corresponds to the commodity code BE?
• What role does Exaggeration play in hand signals for ramp operations?
• Which of the following is NOT one of the four components necessary for a "good hand signal"?
• Which command is used to stop the airstart procedure?
• What is the primary function of the main gear chocks?
• How many agents are required to hook up a tower to an aircraft?
• What type of instruction would "slow down" likely represent on the ramp?
• What must be confirmed before removing the main gear chocks?
• What is the commodity code for eagle bags?
• Ground Power and Pre-Conditioned Air (PCA) is supplied on every arriving aircraft, except for which model?
• During low visibility conditions, what should be measured to ensure safety?
• Where can you access the local station emergency plan?
• What command is used when there is a requirement for the air supply unit?
• What is indicated by arrow F in the mentioned figure?
• What is essential for ensuring compliance when loading cargo?
• How do you mark a bag as "heavy" on the scanner?
• At what times must hand signals be given with night (lighted) safety wands?
• How many agents are required to be present at the gate when DGS is used for arrival?
• Which command would you give to the crew when requiring additional personnel for ground support?
• What is required when handling cargo that must not be broken down?
• What is the maximum speed limit on service roads in ramp operations?
• What type of aircraft requires an electric start when the APU is inoperative?
• When should a ramp vehicle be inspected by the operator?
• What is the speed limit in the safety envelope on the active ramp?
• What should personnel understand from "Area Clear Left Wingwalker"?
• What action is taken to ensure a safe departure once the engine is running?
• What are two things that must be completed prior to hooking up a tower to an aircraft?
• When should personnel expect to receive communication indicated by "Want Interphone or Talk"?
• Which of these actions should follow the signal "Set Brakes"?
• What component is identified by arrow C in the provided figure?
• Where are the chocks typically placed during normal weather conditions?
• Which command should be executed to secure the aircraft for departure?
• What is the purpose of the Anti-collision beacon?
• During pushback, in which gear must the tractor be operated?
• Before guiding an aircraft, what is essential for safety on the ramp?
• What must occur before entering the ingestion zone?
• What is meant by "Area Clear Right Wingwalker"?
• Which command indicates to "attract attention" during ramp operations?
• What is the key feature of the approach pattern for loading wide body aircraft?
• Which component must be inspected before towing an aircraft?
• What important aspect is communicated through the signal "Want Interphone or Talk"?
• What must be done prior to closing the aircraft bin door?
• What type of bag is identified as an interline bag in ORD?
• What does the phrase "Clearance to Depart" typically signify?
• What immediate action should be taken if the brakes fail during pushback?
• Before disconnecting ground power and PCA, who must you request permission from?
• Which statement is true regarding ground power and PCA supply on incoming aircraft?
• How many feet away from the aircraft should a brake safety check be performed?
• What must be installed before connecting a tower to an aircraft?
• When must the post arrival walk around be completed?
• What is the primary action indicated by the phrase "Release Brakes" in ramp operations?
• What does the acronym PPS stand for in the context of airline operations?
• What is the standard procedure if equipment is found unserviceable after inspection?
• Which signaling is used when additional personnel are needed for a safe departure?
• Which indication confirms that the aircraft is secured from moving?
• How does "Gate Hold" impact the aircraft's readiness for departure?
• What is the first action to take after logging into the scanner for a flight?
• If there is any doubt when wing walking, what signal should be given?
• What is the maximum wind speed before high winds procedures are initiated on the ramp?
• What is the primary command to indicate aircraft readiness for movement?
• What does it mean when the flight deck flashes the nose gear light one time?
• What is the function of the compartment drop down on the scanner?
• Where is the APU emergency shut down on the B737 aircraft?
• During which phase of operation must the towbar be correctly matched to the aircraft type?
• Which type of cargo has the highest loading priority?
• What is the primary purpose of using hand signals during ground operations?
• What process should be confirmed before indicating an aircraft is ready to tow?
• When a skid is not accommodated, what is the correct procedure?
• What does "RATE OF CLOSURE" primarily concern in ramp terms?
• What does the command "engine fire" indicate?
• What is a "Three-Way" connection used for in ramp operations?
• What should be done immediately after initializing the flight?
• What should be done if the engines are running while chocking the aircraft?
• Who should you refer all requests for information from the media to?
• What is the purpose of connecting external power to an aircraft?
• What should be done if a towbar becomes disconnected during an aircraft movement?